Triangle Trigonometry
Any triangle can be solved from three of its parts.
Pin four boards into a square frame, lean on a corner, and it folds flat. Pin three boards into a triangle, and it won't budge: the corners have nowhere to go. That's why roof trusses are made of triangles. It also means that once a triangle's three sides are set, its angles, its height, and its area are already decided. All that's left is to calculate them.
Three parts fix a triangle
A triangle has six parts, three sides and three angles, and three of them are usually enough. First, the names, which the rest of this Topic uses too: the corners are , , and , and each side takes the lowercase letter of the corner it faces.
Three sets of parts fix a triangle: two sides and the angle between them (the included angle), all three sides, or two angles and a side. In that last set, the angles add to 180°, so two of them give you the third. That sets the shape, and the side sets the size.
At least one part has to be a side, because a small triangle and its big copy have identical angles. One other set, two sides and an angle that isn't between them, can fit two different triangles, and this Lesson leaves that case out.
Right triangles: ratios that belong to the angle
Draw a right triangle with a 40° angle, then a bigger one with the same angle. They're the same shape at different sizes, so the ratio of any two sides didn't change. That ratio belongs to the angle, not the triangle. Sine, cosine, and tangent are the names of those ratios, and the Handbook's Trigonometry section defines them on a right triangle with legs and and hypotenuse :
Adapted from the FE Reference Handbook, Trigonometry
Exam triangles come in every orientation, so read the letters by position: is opposite , is adjacent to it, and faces the right angle. At the other acute angle, and trade places.
To solve a right triangle, remember that the 90° is already one of the three parts, so any two more, at least one of them a side, finish the job. Pick the ratio that connects what you have to what you want. With two sides, gives the third, and an inverse such as gives the angle.
Triangle problems run in degrees. Try : it should read 0.5. If it reads −0.988, the calculator is in radian mode, and it will hand you wrong answers with a straight face.
Engineers rarely state a slope's angle. They give a rise and a run, such as a roof that climbs 3 ft for every 4 ft across. That's a slope triangle: a right triangle with the rise as and the run as . Find , and you can read all three ratios without ever finding :
The law of cosines: Pythagoras with a correction
Now drop the right angle. Hinge two bars at , with and , and watch the gap between their free ends. At exactly 90° the gap is the Pythagorean 5. Close the hinge, and is shorter than Pythagoras predicts. Open it, and is longer.
So needs a correction that's zero at 90°, subtracts below 90°, and adds above it. Cosine does exactly that. Measure along bar from the hinge. At 60°, the tip of bar sits 2 units out, so . At 90°, it's directly above the hinge, and is 0. At 120°, it's 2 units behind the hinge, so . Scale that by both bars, let the algebra supply a factor of 2, and you have the law of cosines:
At 60°, the correction is , the amount the figure takes off.
The Handbook's Trigonometry section prints it three times, once per side, starting with . It's one rule relabeled: the side on the left faces the angle on the right, and the other two sides meet at that angle. That's why it takes the included angle. If you know and , you need , the corner where they meet.
With three sides, run it backward. The Handbook prints only the form above, so rearrange it:
An obtuse angle takes care of itself: the fraction comes out negative, and arccosine returns an angle above 90°. The hinge shows one more thing: the wider the corner, the longer the side across from it. So the largest angle always faces the longest side.
The law of sines: each side and the angle it faces
Wider corners face longer sides, as the hinge showed. The law of sines makes that exact: each side is proportional to the sine of the angle it faces. To see why, drop a height from down to side .
The two right triangles share : on the left and on the right. Set those equal and divide to get . A height from another corner brings in . That's the law as the Handbook's Trigonometry section prints it:
Every fraction pairs a side with the angle it faces, so you need one complete pair to start. If the known side faces the angle nobody gave you, get that angle from the 180° sum first.
Keep this law for sides. For an angle, it would mean pressing arcsine, which has a blind spot: and are both 0.5, and only ever answers 30°. Arccosine has no such trouble, because cosine turns negative past 90°.
Spot which set of parts you've been given, and the tool follows.
| You know | Reach for | To get |
|---|---|---|
| Right angle + 2 parts | Ratios, Pythagorean | Everything |
| 2 sides + included angle | Law of cosines | Third side |
| 3 sides | Law of cosines, backward | Any angle |
| 2 angles + a side | 180° sum, law of sines | Any side |
Area: half base times height, with the height in disguise
Every triangle's area is half base times height, as the Handbook's Statics table of area properties prints it. Problems rarely hand you the height, but take side as the base, and side leans up from with a rise of .
That gives the area, with the word written out because already names an angle:
The Handbook doesn't print this form. The closest is the Parallelogram entry under Mensuration of Areas and Volumes, with an area of , and a triangle is half a parallelogram.
As in the law of cosines, has to be the angle between and . Past 90°, the height lands outside the base, but the formula still holds. Given three sides and no angle, use the law of cosines to find any angle, then use the two sides that meet there.
Identities: one value, many disguises
Some questions have no triangle at all. They show an expression and ask which choice is equivalent. The answer is in the Handbook's list under Trigonometry, Identities, but that list runs about thirty lines with no group names, so it helps to know the groups and where they come from.
The Pythagorean group is a right triangle with . Its legs are then and , and becomes . Divide through by for , where .
The sum and difference group splits the angle inside a sine or cosine, and the sine of a sum isn't the sum of the sines. The difference forms flip the middle sign. The double-angle group is the sum group with , and the Pythagorean identity rewrites in two more ways.
| Group | Identity |
|---|---|
| Sum | |
| Sum | |
| Double angle | |
| Double angle |
Adapted from the FE Reference Handbook, Trigonometry, Identities
The letters are slots, so also says . When you aren't sure of a match, evaluate both expressions at an unfriendly angle such as 17°, in degree mode. True equivalents agree to every digit. Friendly angles can fool you: at 30°, and are both 0.5.