Coordinate Geometry
Two points give a direction and a distance, and a direction and a distance give a new point.
Before this Lesson
A site plan puts a survey monument at N 1,000, E 2,000 and the corner of a new footing at N 1,300, E 2,400, with a pond between them. A crew has to stake that corner, and nobody has measured anything across the pond. Nobody needs to. Those four numbers already say where to aim the instrument and how far away to look: 53°08′ east of north, 500 ft.
Every point is a northing and an easting
A point's coordinates say how far it sits north and east of some chosen origin: its northing and its easting . The origin is often placed well to the south and west of the site, so that every number stays positive. That's why the monument isn't at N 0.
Sometimes the origin sits right on the site, and the coordinates carry labels, such as 215.40 S, 310.60 E. Those labels are signs in disguise. North and east are positive and south and west are negative, just as on the Handbook's Latitudes and Departures sign cross, so that point has and .
Now take two points and subtract, second minus first:
Those are the moves north and east that get you from the first point to the second. You've met them already. The line between two coordinated points is a course, and and are its latitude and departure, the same numbers as in Latitudes and Departures. From the monument to the footing corner, and .
So the line and its two differences form one right triangle, and there are only two things to do with it. Given both points, you know the legs and want the hypotenuse and its direction. That's the inverse computation. Given one point, a direction, and a distance, you know the hypotenuse and want the legs, which lead to the other point. That's the forward computation.
The Handbook's surveying pages stop at that sign cross, so northings, eastings, and both computations are yours to carry to the exam. Its Mathematics pages do have the general geometry in and , and to read them, take as and as .
The signs name the quadrant
Because and are a latitude and a departure, their signs tell you where a line points before you touch the calculator. Positive heads north and negative heads south. Positive heads east and negative heads west. With for a bearing's acute angle, as in Bearings and Azimuths, each pair of signs settles the azimuth range and the form of the bearing.
| , | Line points | Azimuth range | Bearing | Azimuth |
|---|---|---|---|---|
| +, + | Northeast | 0° to 90° | N E | |
| −, + | Southeast | 90° to 180° | S E | |
| −, − | Southwest | 180° to 270° | S W | |
| +, − | Northwest | 270° to 360° | N W |
The order of the subtraction matters. "From A to B" means B minus A. Subtract the other way and both signs flip, so the line points exactly backward and you get the back azimuth, with nothing to warn you. That's one more reason to sketch it first: place the points where their coordinates say, draw the arrow from the first to the second, and check that it agrees with the signs.
From two points to a direction and a distance
Take the distance first, since it's the easy half of the inverse. The legs are and , and the line is the hypotenuse:
The Handbook's Straight Line entry prints this as the distance between two points, in and . Squaring wipes out the signs, so the distance is the same in either direction.
The direction comes from the same triangle you ran backward in Latitudes and Departures. An azimuth starts at north, so is opposite the angle and is adjacent to it:
That's upside down from math class and from the Handbook's Polar Coordinate System entry, , whose angle starts at the x-axis. With as and as , that ratio finds the other corner of the triangle.
The catch is the one you met there, and coordinates walk right into it. A line with and and a line with and point in opposite directions. But the minus signs cancel in the ratio, so both hand the calculator 1.333, and it answers 53.13° both times.
The other two quadrants fare no better. and gives −53.13°, which isn't a direction on the dial. Adding 360° doesn't rescue it: 306.87° points northwest, and this line heads southeast. A calculator's arctangent only answers between −90° and 90°, and the Handbook prints no rule for fixing that.
So ask the arctangent only for the size of the angle, and let the signs choose the direction:
The signs pick the bearing's letters, and the table above turns into an azimuth. For that southwest line, both signs are negative, so the bearing is S 53°08′ W and the azimuth is 180° + 53°08′ = 233°08′.
If your calculator has a rectangular-to-polar conversion, it can run the whole inverse at once, and that function does read the signs. Enter as x and as y. That's the reverse of how you read the Handbook, on purpose: the function's angle starts at whatever you enter as x, and you want it to start at north. You get the distance and an angle between −180° and 180° that's already in the right quadrant. Add 360° if it's negative.
From a direction and a distance to a new point
The forward computation runs the same triangle the other way. You're on a known point with an azimuth and a distance, and the new point is at the far end of the hypotenuse. The legs are the latitude and departure, and they're moves, so they add to the start:
An azimuth brings its own signs. Go 350.00 ft from N 1,000.00, E 2,000.00 at azimuth 247°10′. The latitude is −135.82 ft and the departure is −322.57 ft, so the new point is at N 864.18, E 1,677.43. Both coordinates dropped, as they should on a southwest course. With a bearing, either convert it to an azimuth first, or take the sizes from its angle and the signs from its letters.
Carrying coordinates around a traverse
A traverse is forward computations in a chain. Each station is the start of the next course, so its coordinates are the previous station's plus one course's latitude and departure. The course table already holds the moves, and two more columns keep a running total of where you are. If the courses come as azimuths and lengths, find their latitudes and departures first.
The corner coordinates you get this way are also where Area by Coordinates and Offsets picks up.
Setting up on a known point
The last job finds a point nobody has coordinates for yet, and it uses everything above. Set a total station over a known point A and sight another known point B. That sight is the backsight. As Bearings and Azimuths pointed out, the instrument has no idea where north is. It only measures the angle between two things it sights. But you know where B is, so you know the azimuth of that line of sight, and that's as good as knowing north. Turn the horizontal angle to the new point P, measure the distance, and the rest is three moves:
- Inverse from the setup to the backsight, for the azimuth of AB.
- Turn the angle from that line, for the azimuth of AP.
- Forward from the setup, along that azimuth, for the measured distance.
The turn is the only new arithmetic. An angle to the right adds, and an angle to the left subtracts. If the result leaves 0° to 360°, bring it back onto the dial.
Step 1 is where this goes wrong. You're standing at A looking at B, so you want the azimuth from A to B. When you carried a direction along a traverse, you stood at a new station facing back the way you came, and that's why you started from a back azimuth. It's the same idea: start from the direction you're actually facing. Here, that's A to B, and using its back azimuth would swing the whole setup 180° around. Step 3 starts from A too, since that's where the distance was measured from.