Superelevation and Sight on Curves
Banking the road lets friction do less of the work of turning the car.
Before this Lesson
Take a curve with a 1,200 ft radius at 60 mph. To follow it, your car needs a sideways push toward the center of about a fifth of its weight. On flat pavement only the tires can supply it, and on a wet road at 60 mph, designers count on them for just 12% of the car's weight. The other 8% comes from the road itself, tilted toward the inside of the curve.
How much tilt, and how sharp a curve it buys, is the first half of this Lesson. The second half is the other thing a curve takes from a driver: the view of the road ahead.
Two ways to push a car around a curve
Anything following a circle of radius at speed needs a net force toward the center of . Divide by the car's weight, , and the push the car needs, as a share of its weight, is . At 60 mph, or 88 ft/s, on a 1,200 ft radius, that's , the fifth from the Hook.
Two things can supply it. The first is the tires, gripping the pavement sideways. That grip, as a share of the car's weight, is the side friction factor . The second is the road. Tilt it down toward the inside of the curve, and the pavement's push on the car, always square to the surface, leans toward the center. The tilt is written like a grade, as the drop across the road per 100 ft, and it's called the superelevation , in percent. An 8% superelevation drops about 1 ft across a 12 ft lane.
In Rotation and Circular Motion, the pavement's push on a banked curve split in two: a vertical part that held up the weight , and a horizontal part, , that turned the car. With no friction, the bank did the whole job when .
The bank's share is , and is the slope of the pavement, exactly . So an 8% bank tips 8% of the car's weight toward the center, and the tires make up the rest. Together they have to cover what the car needs:
The exact balance has a small product of and in it, worth about 1% here, and the Handbook drops it. Now put the speed in mph, . With , the constant is , which rounds to . That gives the equation in the Handbook's Horizontal Curves table, on the row for side friction factor:
The 15 is with the speed in mph, just as the 30 in Stopping Sight Distance was . is in feet, and two habits keep the rest honest:
- goes in as a percent. The Handbook defines in percent, so an 8% superelevation is , and the 0.01 turns it into 0.08 of the weight. Enter 0.08 and the bank comes out a hundred times too weak.
- stays in mph. The 15 already holds the conversion.
Why the bank and the tires have limits
More bank and more grip buy a sharper curve, so why not bank every curve at 20%? Run the thought experiment. An ice storm hits, and a car stops on the curve, or a truck crawls around it. A stopped car needs no push toward the center at all. For it, the bank is just a slope across the road, pulling it downhill toward the inside, and ice may not hold it there.
So design caps the superelevation at a maximum, . AASHTO's design guide puts it around 8% where snow and ice are common, and no higher than 10 to 12% anywhere.
Side friction is capped too, and the cap falls as speed rises. Design isn't the most a tire can give before it skids. It's a sideways push drivers find comfortable, kept well short of a skid on wet pavement. Speed shrinks it two ways: a wet road grips less the faster the tire rolls over it, and drivers at high speed put up with less sideways shove. AASHTO's values run from about 0.20 at 30 mph to 0.14 at 50, 0.12 at 60, and 0.10 at 70. The Handbook prints no or values, so a problem gives you both.
The sharpest curve for a design speed
A design uses both limits at once. With the bank at and the tires at their design , the left side of the equation can't get any bigger, so can't get any smaller:
A sharper curve would ask the tires for more than , so round up, never down. If the design is stated in degree of curve, from Horizontal Curve Geometry turns the minimum radius into a maximum degree of curve, which rounds down.
Checking a curve that's already built
An existing curve fixes , and the question asks about one of the other letters. It's the same equation, solved for whichever one is missing. The superelevation a curve needs is whatever the tires don't cover, and the friction it demands is whatever the bank doesn't:
Either number is only half an answer. A required means something only next to , and a friction demand only next to the allowable . If the demand is higher, the curve is too sharp for that speed.
Solve for instead, and you get the fastest speed the curve can carry with its bank and the allowable friction both used up. Round it down:
What moves the minimum radius
Read for its shape. With and fixed, the radius grows with the square of the speed, the same square that sits in . Double the design speed, and the minimum radius quadruples. At real design values it grows faster still, because the allowable drops at the higher speed.
More superelevation helps, but only by its share of the total. At 60 mph with , raising from 6% to 8% grows the total from 0.18 to 0.20, and the minimum radius falls from 1,333 ft to 1,200 ft. That's 10%, not the quarter that 6 to 8 might suggest.
Seeing around the inside of a curve
Now drive the curve again, in the inside lane. A building, a wall, or the face of a rock cut stands on the inside of the curve, and it hides the road ahead. To stop for something in your lane, you need to see a full stopping sight distance along it.
Where does the view get cut off? Your eye and the object are both in the inside lane, and design puts both on that lane's centerline. The lane between you curves, but your line of sight runs straight. So the sight line is a chord of the arc you're driving, with measured along the arc between its ends. The chord swings farthest from the lane at its middle, and anything closer to the lane than that blocks the view. You've met that gap before.
From Horizontal Curve Geometry: the middle ordinate runs from the middle of an arc inward to the middle of its chord, and for an arc with central angle , .
Here the arc is just the stretch of lane you need to see, long. Its central angle is radians, which is degrees, so half of it is degrees. Put that in for :
That's the Handbook's equation, on the sight distance row of the same Horizontal Curves table. It calls the horizontal sight line offset and the sight distance, in feet. The 28.65 is , so the cosine's argument is in degrees, though the Handbook doesn't say so. Put your calculator in degree mode.
The Handbook calls just the radius. Here it's the radius of the inside lane's centerline, where the eye and the object sit, and is measured from that same line. On a two-lane road, if a question gives the radius of the road's centerline, take off half a lane. The equation also assumes the whole sight distance lies on the curve, which is the usual case.
Working back from an obstruction
Sometimes the building is already there, and the question is how far a driver can see past it. Run the equation backward. Solve for the cosine, then take the inverse cosine, still in degrees:
The Handbook prints only the forward form, so rearrange it yourself. That is the sight distance the curve offers. If the question wants a speed, set the stopping sight distance equal to it and solve for as a quadratic, the way Stopping Sight Distance did. Keep the positive root and round down.
What moves the offset
On real curves the angle is small, and the offset comes out very close to . For the Hook's curve that's , against 33.3 ft from the full equation. Use it to judge how the offset responds, not to compute it.