Moments and Couples
A force can push and twist at once, and the moment measures the twist.
Before this Lesson
A bolt has rusted tight, and you have a wrench and 50 lb of pull. Pull across the handle near the bolt, and nothing happens. Move your hand out to the end, same 50 lb, and the bolt starts to creak. Now pull straight along the handle, away from the bolt: same 50 lb, nothing, and ten times that wouldn't help. One force, three results. The twist has to depend on something besides the force.
How far the line misses
Extend each pull into its line of action, and the three cases sort themselves out. What matters is how far that line misses the bolt. Call that miss distance . The twist, called the moment, is the force times the miss distance:
The miss distance is measured the short way, at a right angle to the line, and a tilted pull shows why. Take a handle of length with a force at its end, at an angle to the handle, and split the force in two. The part along the handle, , only tugs on the bolt, like the Hook's third pull. The part across the handle, , does all the twisting, with the whole handle as its lever: . Group that differently, and it's . And is exactly the perpendicular distance from the bolt to the line.
The Handbook's Moments (Couples) entry defines the moment as the cross product , with running from the point to the force's line of action. Its size is , and is . So is the same thing, though the Handbook never prints it.
A moment also has a sense. Pin the body at the point, let the force push, and see which way it wants to turn. This Topic counts counterclockwise as positive and clockwise as negative, a rule the Handbook never states, though its component formula works out that way. The units are force times length: lb·ft, kip·ft, N·m, and kN·m. A kip·in is a twelfth of a kip·ft.
Slide a force along its line, and nothing changes
has no term for where along the line the force acts. So slide a force along its own line, and its moment about every point stays the same. The distance from the point to the arrow grows or shrinks, but the line hasn't moved, so hasn't either.
It matches what you'd feel. Shove a long, stiff plank lengthwise from one end, or pull it from the other, and the plank as a whole goes the same way. Inside the plank it matters, since one squeezes and the other stretches, but that's a later question. The Handbook doesn't mention sliding, so this one is yours to carry.
Two quick judgments follow. If a force's line passes through the point, and the moment is zero, however big the force is and however far away it acts. That's the pull along the handle. And to compare several forces, ignore where the arrows sit. Extend each line, read off its , and weigh that against the force's size. The biggest force, or the one farthest out, may not win.
When d is hard to see, use components
Finding can take real geometry, and there's often a way around it. Replace the force with its components. Together they do exactly what the force does, so their twists add up to its twist, and each one's arm is right there in the figure: a vertical force's arm is a horizontal distance, and a horizontal force's arm is a vertical one.
With counterclockwise from +x, and , signs included. With a slope triangle, each component is the force times the matching leg over the hypotenuse, with its sign from where the arrow points. For more, see Forces and Resultants.
Measure and from the moment point to any point on the force's line. In the figure, pushes up to the right of , turning counterclockwise, for . pushes right above , turning clockwise, for . Together:
That's as the Handbook's Moments (Couples) entry prints it, the k component of from The Cross Product. Plug in signed values, or take each term's size as force times arm and give it a sign by which way it turns. The answer is the same.
Here's where sliding pays off. Any point on the line will do for , so choose an easy one. Where the line crosses the horizontal through , and the term vanishes. Where it crosses the vertical through , the term does.
Several forces: add the twists
Moments about one point are signed numbers, so the net moment of several forces is their sum. The Handbook's Systems of Forces entry writes it as . In practice, go force by force: size, arm, sense. Forces whose lines pass through the point drop out, an inclined force gets resolved first, and the sign of the total is the net sense. Keep every term's sign in the one sum, since a clockwise moment and a counterclockwise moment fight each other.
A couple is pure twist
Turn a steering wheel with both hands: one pushes up, the other pushes down, equally hard. Their forces add to zero, so the wheel's center isn't pushed anywhere, and yet the wheel turns. That pair is a couple. The Handbook's Moments (Couples) entry defines it as two forces equal in magnitude, opposite in direction, and parallel. It stops there, so the rest is worth working out.
Take moments about a point a distance from the nearer force, with the two lines apart:
The cancels. That's the strange part: a couple has the same moment about every point, on the body or off it. Try it with 100 lb forces 3 ft apart, from outside the pair and from between them.
So a couple is usually drawn as a curved arrow with a value, and it doesn't need a location. And with no net force, no single force can replace it.
Moving a force costs a couple
A load out on a sign's arm pushes on the post's base from far away, and to see what the base feels, you'd like that force at the base. You can't just move it. At the tip, it has a moment about the base, and at the base, it has none, so you'd have changed the problem.
Here's how to move it honestly. At the new point, add the force and its opposite. They cancel, so you've added nothing. But now the original force and the opposite one form a couple, and what's left over is the same force, at the new point.
So a force at one point equals the same force at another point, plus a couple equal to the original force's moment about the new point. That pair is a force-couple system. Sliding along the line is the free case, where that moment is zero. The Handbook doesn't describe this move, and you'll use it often: the moment at a fixed support, in Free-Body Diagrams and Supports, is this couple pushing back.
What makes two systems equivalent
Every trade so far passes one test. Two force systems are equivalent when they have the same resultant force and the same moment about any one point. One point is enough, because when you shift the moment point, the change in moment depends only on the shift and the resultant force. If the resultants match, both moments change alike, so matching at one point means matching at all of them.
The Handbook's Systems of Forces entry never says "equivalent," but its two sums, and , are exactly the two things to compare.
One force to replace them all
Now move every force in a system to one point, . You end up with one force, , and one couple, , the net moment about you already know how to find. Any couples in the system join that sum as they are, with no arm, since their moment is the same about as about anywhere.
If isn't zero, you can go one better and lose the couple. Step sideways off until its own moment about equals . It has the same force and the same moment, so it's equivalent. The distance is:
The Handbook doesn't print this, so know it cold. And is only a size. Place on the side where its moment has the same sense as . A downward to the right of turns clockwise, and to the left it turns counterclockwise. That can land past the end of the bar, which is fine: a line of action doesn't have to touch the body.
When the forces aren't parallel, has both components, and the question is usually where its line crosses an axis. Put at the crossing, and use . On the x-axis , and on the y-axis , so:
Keep the signs, and these give the side for you, parallel forces included.
To balance a system with one added force, make that force 's exact opposite: the same size, the opposite direction, and on the same line. Then the total force and the total moment are both zero.